Søk i SKU …

Filter

show blocks helper

Leverandør

Måleparameter

Miljø

Produkt Grensesnitt

Search…

MX Water Level Sensor, 9m,Ti

Legg til i ønskeliste
Legg til i ønskeliste
Produktnr: MX2001-01-Ti-S Kategori:

The MX2001 water level sensor is used with the HOBO Bluetooth water level data logger (MX2001) and with the HOBO MicroRX Water Level Stations (RX2103 and RX2104) for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, in stainless steel or titanium (recommended for use in saltwater).

Highlighted Features

  • Non-vented design reduces maintenance
  • Durable, ceramic sensor
  • 3-point NIST-traceable calibration certificate

In what environment does this sensor operate?

This sensor operates in an underwater environment.

What measurements does this sensor support?

The MX2001-S sensor supports the following measurements: Barometric Pressure, Water Level and Water Temperature

MX2001 RX2103/4 RX3000
Communications Bluetooth Low Energy Cellular Ethernet, WiFi, Cellular
Logger Dimensions 2.54 cm (1.0 in.) diameter,
28.9 cm (11.4 in.) length
19.95 x 13.68 x 7.49 cm
(7.85 x 5.39 x 2.95 in.)
18.6 x 18.1 x 11.8 cm
(7.3 x 7.1 x 4.7 in.)
Smart Sensor Ports - 5 10
Module Ports None 2*
On-Board Barometric Sensor Yes With required Water Level Module (RXMOD-W1)
Water Level Sensor
(MX2001-S/-Ti)
Included Purchased separately
Cable Price $70 + $4/m
Logger Price $595

Includes Water Level Sensor
Starting at $640/$700

Needs Water Level Sensor
Starting at $899**

Needs Water Level Sensor & Module
* The RX3000 can only include one Water Level Module/Sensor combination. If your application requires multiple water level sensors, an Analog Module and third party water level sensors with 4-20 mA output are required.
** Further accessories required for monitoring water level

Tilleggsinformasjon

Måleparameter

, ,

Miljø

Specifications

Pressure (Absolute) And Water Level Measurements MX2001-01-S and MX2001-01-Ti-S:

Operation Range 0 to 207 kPa (0 to 30 psia); approximately 0 to 9 m (0 to 30 ft) of water depth at sea level, or 0 to 12 m (0 to 40 ft) of water at 3,000 m (10,000 ft) of altitude
Factory Calibrated Range 69 to 207 kPa (10 to 30 psia), 0° to 40°C (32° to 104°F)
Burst Pressure 310 kPa (45 psia) or 18 m (60 ft) depth
Water Level Accuracy* Typical error: ±0.05% FS, 0.5 cm (0.015 ft) water
Maximum error: ±0.1% FS, 1.0 cm (0.03 ft) water
Raw Pressure Accuracy** ±0.3% FS, 0.62 kPa (0.09 psi) maximum error
Resolution <0.02 kPa (0.003 psi), 0.21 cm (0.007 ft) water
Pressure Response Time (90%)*** <1 second at a stable temperature

Tilhørende produkter…