Søk i SKU …


show blocks helper




Produkt Grensesnitt


MX Water Level Sensor, 4m,Ti

Legg til i ønskeliste
Legg til i ønskeliste
Produktnummer: MX2001-04-Ti-S Kategori:

The MX2001 water level sensor is used with the HOBO Bluetooth water level data logger (MX2001) and with the HOBO MicroRX Water Level Stations (RX2103 and RX2104) for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, in stainless steel or titanium (recommended for use in saltwater).

Highlighted Features

  • Non-vented design reduces maintenance
  • Durable, ceramic sensor
  • 3-point NIST-traceable calibration certificate

In what environment does this sensor operate?

This sensor operates in an underwater environment.

What measurements does this sensor support?

The MX2001-S sensor supports the following measurements: Barometric Pressure, Water Level and Water Temperature



, ,



Pressure (Absolute) And Water Level Measurements MX2001-04-S and MX2001-04-Ti-S:

Operation Range 0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude
Factory Calibrated Range 69 to 145 kPa (10 to 21 psia), 0° to 40°C (32° to 104°F)
Burst Pressure 310 kPa (45 psia) or 18 m (60 ft) depth
Water Level Accuracy* Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water
Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water
Raw Pressure Accuracy** ±0.3% FS, 0.43 kPa (0.63 psi) maximum error
Resolution <0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water
Pressure Response Time (90%)*** <1 second at a stable temperature