The MX2001 water level sensor is used with the HOBO Bluetooth water level data logger (MX2001) and with the HOBO MicroRX Water Level Stations (RX2103 and RX2104) for accurate water pressure, temperature, and water level measurements. These sensors are available in four depth ranges, in stainless steel or titanium (recommended for use in saltwater).
Highlighted Features
- Non-vented design reduces maintenance
- Durable, ceramic sensor
- 3-point NIST-traceable calibration certificate
In what environment does this sensor operate?
This sensor operates in an underwater environment.
What measurements does this sensor support?
The MX2001-S sensor supports the following measurements: Barometric Pressure, Water Level and Water Temperature
Tilleggsinformasjon
| Måleparameter | |
|---|---|
| Miljø |
Spesifikasjoner
Pressure (Absolute) And Water Level Measurements MX2001-04-S and MX2001-04-Ti-S:
| Operation Range | 0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude |
| Factory Calibrated Range | 69 to 145 kPa (10 to 21 psia), 0° to 40°C (32° to 104°F) |
| Burst Pressure | 310 kPa (45 psia) or 18 m (60 ft) depth |
| Water Level Accuracy* | Typical error: ±0.075% FS, 0.3 cm (0.01 ft) water Maximum error: ±0.15% FS, 0.6 cm (0.02 ft) water |
| Raw Pressure Accuracy** | ±0.3% FS, 0.43 kPa (0.63 psi) maximum error |
| Resolution | <0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water |
| Pressure Response Time (90%)*** | <1 second at a stable temperature |
