Filter

show blocks helper

Leverandør

Måleparameter

Miljø

Produkt Grensesnitt

HOBO UX90 Motor on/off 512K

kr 1,740.00 eks. mva

Legg til i ønskeliste
Legg til i ønskeliste
Varenummer: UX90-004M Kategori:

The HOBO Motor On/Off data logger records motor on and off conditions within an AC magnetic field with its internal sensor, or mechanical contact closures from external sensing devices. This data logger is ideal for tracking the usage and runtimes of motors, pumps, compressors, and other equipment. The HOBO UX90-004 Motor On/Off Data Logger is available in a standard 128 KB memory model (UX90-004) capable of 84,650 measurements and an expanded 512KB memory version (UX90-004M) capable of over 346,795 measurements.

Highlighted Features

  • Dual internal motor sensors gives better sensitivity for well-shielded motors
  • External input for measuring mechanical contact closures when signal strength is low
  • Auto-calibration of ON and OFF thresholds ensures reliable readings
  • Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis

In what environment does this data logger operate?

This data logger operates in an indoor environment.

What measurements does this data logger support?

The UX90-004M data logger supports the following measurements: Motor On/Off, Runtime and State Open/Closed

 

HOBO data loggers require HOBOware software and a USB cable. (Note: A USB cable is included w/HOBOware Pro CD or USB software purchase). See compatible items below.

Tilleggsinformasjon

Måleparameter

,

Miljø

Spesifikasjoner

Internal Motor Sensor


AC magnetic field threshold: > 40 mGauss at 60 Hz

External Input


External contact input: Electronic solid state switch closure or logic driven voltage output
Range: 0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered)
Maximum state and runtime frequency: 1 Hz
Solid state switch closure: Input Low: < 10 KΩ; Input High: > 500 KΩ
Internal weak pull-up: 100 KΩ
Input impedance: Solid state switch closure: 100 KΩ pull up

Logger


Resolution: Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event
UX90-002- Temperature Specification ChartTime accuracy: ±1 minute per month at 25°C (77°F) (see Plot A)
Battery life: 1 year, typical with logging intervals greater than 1 minute and normally open contacts

Memory
UX90-004: 128 KB (84,650 measurements, maximum)
UX90-004M: 512 KB (346,795 measurements, maximum)

Download type: USB 2.0 interface
Download time: 10 seconds for 128 KB; 30 seconds for 512 KB

Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/readout: 0° to 50°C (32° to 122°F) per USB specification

LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 3.66 x 8.48 x 1.52 cm (1.44 x 3.34 x 0.6 in.)
Weight: 30 g (1.06 oz)
Environmental rating: IP50