Søk i SKU …

Filter

show blocks helper

Leverandør

Måleparameter

Miljø

Produkt Grensesnitt

Search…

Campbell Scientific: CR300 Datalogger

Veldig robust og pålitelig datalogger, egnet for vitenskapelige applikasjoner og alle typer feltstasjoner.

Legg til i ønskeliste
Legg til i ønskeliste
Produktnummer: CS_CR300 Kategori: Stikkord:

Overview

The CR300 is a multi-purpose, compact measurement and control data logger. This small, low-cost, high-value data logger offers fast communications, low power requirements, built-in USB, and excellent analog input accuracy and resolution. The CR300 can measure most hydrological, meteorological, environmental, and industrial sensors. It concentrates data, makes it available over varied networks, and delivers it using your preferred protocol. It also performs automated on-site or remote decision making for control and M2M communications. The CR300 is ideal for small applications requiring long-term, remote monitoring and control.

The CR300 includes Wi-Fi, cellular, or the following radio options for different regions:

  • CR300-RF407: US and Canada
  • CR300-RF412: Australia and New Zealand
  • CR300-RF422: Europe
  • CR300-RF427: Brazil

Note: Campbell Scientific does not recommend the CR300 for use as a PakBus router in networks with more than 50 devices. Large arrays or string variables may also reach memory limits. For such applications, a CR1000X Measurement and Control Datalogger is recommended.

 

Benefits and Features

  • Connects directly to a computer's USB port
  • Differentiates even slight changes in data values with higher resolutions measurements (24 bit Adc)
  • Provides simple serial sensor integration and measurement with SDI-12 and/or RS-232
  • Supports full PakBus networking
  • Includes embedded web page for direct connection via web browser

Spesifikasjoner

-NOTE- Additional specifications are listed in the CR300-Series Specifications Sheet.
Operating Temperature Range
  • -40° to +70°C (standard)
  • Non-condensing environment
Maximum Scan Rate 10 Hz
Case Material Powder-coated aluminum
Analog Inputs 6 single-ended or 3 differential (individually configured)
Pulse Counters 8 (P_SW, P_LL, C1, C2, and SE1 to SE4)
Voltage Excitation Terminals 2 (VX1, VX2)
Communications Ports
  • USB Micro B
  • RS-232
Switched 12 Volt 1 terminal
Digital I/O 7 terminals (C1, C2, P_SW, and SE1 to SE4) configurable for digital input and output. Includes status high/low, pulse width modulation, external interrupt, and communication functions. Exception: The SE4 terminal doesn’t do external interrupt.
Input Limits -100 to +2500 mV
Analog Voltage Accuracy
  • Accuracy specifications do not include sensor or measurement noise.
  • ±(0.04% of measurement + offset) at 0° to 40°C
  • ±(0.1% of measurement + offset) at -40° to +70°C
ADC 24-bit
Power Requirements 16 to 32 Vdc for charger input (CHG) (Current limited to 0.9 A maximum for power converter or solar panel input.)
Power Requirements 10 to 18 Vdc for external batteries (BAT)
Real-Time Clock Accuracy ±1 min. per month
Internet Protocols Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP(APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, NTP, Telnet, HTTP(S), FTP(S), SMTP/TLS, POP3/TLS
Communication Protocols PakBus, Modbus, DNP3, SDI-12, TCP, UDP, and others
CPU Drive/Programs 80 MB serial flash
Data Storage 30 MB serial flash
Idle Current Drain, Average 1.5 mA (@ 12 Vdc)
Active Current Drain, Average
  • 5 mA (@ 12 Vdc for 1 Hz scan with 1 analog measurement)
  • 23 mA (@ 12 Vdc with processor always on)
Dimensions 13.97 x 7.62 x 4.56 cm (5.5 x 3.0 x 1.8 in.)
Additional clearance required for cables and leads.
Weight 242 to 250 g (0.53 to 0.55 lb) depending on communication option selected

Technical description

The CR300 is a low-powered data logger designed to measure sensors, analyze data, and store data and programs. A battery-backed clock assures accurate timekeeping. The on-board, BASIC-like programming language—common to all Campbell Scientific data loggers—supports data processing and analysis routines.

The CR300 wiring panel includes a switchable 12 V terminal, and analog grounds dispersed among six analog terminals.